Create your own elegant interior or exterior doorway or window treatment. All components are made from solid wood or rigid polyurethane and can be cut with a standard hand saw and nailed or screwed in place. All parts are fully primed, ready to be painted using any paint.

The D307 Pineapple Pediment and D306 Peaked Pediment are designed for use with the H430 Triglyph Header and the H440 Keystone. The header and keystone let you adapt a pediment to any width doorway.

The O401 is designed to fit inside the D306 Peaked Pediment but it can also be used with decorative moulding as the central feature in a panel.

The H430 Triglyph Header and H440 Keystone can be used with or without a pediment. When used with a pediment, they let you adapt the pediment to any width doorway. Simply cut out excess width at the center of the header and cover the joint with the keystone.

The plain section at the bottom of each pilaster column is 16 inches tall. You can trim the bottom off of a pilaster to adjust it to the height requirements of your installation. You can either remove just part of the plain section or, for a shorter installation, remove all of it and let the flutes end open.

Pilaster regular capitals are sold individually. Three styles are available for use with either 6 inch or 8 inch pilasters. Use pilaster regular capitals in any door trim design which does not include a frieze or when creating a stand-alone pilaster.

Coped capitals are sold in pairs. They are notched to fit over the left and right ends of any of the five friezes. Use coped capitals in any door trim design which includes a frieze.

Brackets can be used inside passageways or as decorative shelf supports. Two brackets can also be used in place of capitals and pilasters in a door trim design.